ALPSAT Satfinder 5HD with Realtime Spektrum and NIT

Satfinder 5 HD Slim DVB-S and DVB-S2 NIT + KU/KA/C-Band

work as Professionals!

Multi Meter with Real Time Spectrum Analyzer, Constellation measurement, Unikabel and Package measurement

SD and HD Picture MPEG2 & MPEG4

The functionality of the Satfinder 5 HD can be seen. It has many useful features that are usually found only in Commercial instruments in much higher price ranges.

Read and judge for yourself ....

The SATFINDER 5 HD Slim is a powerful SAT-meter for optimal measurement in DVB-S and DVB-S2 satellite receiver systems.

It is suitable for new installation of a satellite antenna to quickly find a desired satellites as well as to validate existing satellite - receiver systems.

The Signal Can measure directly the LNB or a Multiswitch Output (All LNB types, all multiswitch and DiSEqC types)

The built-in battery makes this device to an ultra - portable measuring instrument.

the unit has a true "real-time" Spectrum Analyzer as Constellation, - and Package measurement..

About a software editor, the instrument can be programmed for other client-specific satellite transponders.

With the handy device, which is supplied in a protective bag with strap, can perfectly work even on steep roofs.

Special Satfinder 5 HD SLIM:

• MPEG2 and MPEG4 HD TV-Picture
• DVB-S SD und DVB-S2 HD Measurment (QPSK und 8PSK)
• DSS - DIRECTV (TM) , DVBS QPSK, DVBS2 QPSK and 8PSK
• Very sensitive device for the detection of very weak signals
• Satellite finder function with static NIT evaluation
• Real-Time Spectrum Analyzer (with adjustable Span)
• BER & MER measurement
• Constellation - Measurement QPSK 8PSK + (SD + HD signals)
• Spectrum NIT satellite detection (already Analyzed in the spectrum analyzer mode, read out the real NIT-Data-Stream and Identifies the satellite )
• Signal Quality Analysis (bad, fair, good, very good, perfect)
• X-pol. Measurement (measures simultaneously Vertical + Horizontal)
• Multilevel measurement (2 satellite signals of a multi-feed system simultaneously in conjunction with DiSEqC switch)
• PACKAGE measurement (showing max. 5 transponder level at a time)
• Mux-scan measurement (multi-switch test)
• DiSEqC Scan (Analyzes and identifies all connected to a multi switch satellite orbital positions)
• Sat NIT evaluation / satellite identification (analyzing the receiving signal and identifies the satellite based on pre-stored transponder data)
• Unicable measurement (8 prestored SCR frequencies 1284, 1400, 1516, 1632, 1748, 1864, 1980 + 2096 MHz)
• KU/KA/C-BAND
• Memory for max. 8000 TV & Radio Channels
• Memory for max. 5000 Transponders
• Memory for max. 250 Satellite-PoPositions

Features:

• 128 x 64 dot matrix LCD (with backlight)
• DVB-S SD and DVB-S2 HD measurement (QPSK and 8PSK)
• Signal level measurement in dBm or dBµV
• Signal - level measurement and - quality as a numerical value 0-99% and as a bar graph
• C / N signal to noise ratio measurement in dB
• BER Bit Error Rate measurement signal before and after error correction
• MER Modulation Error Rate measurement
• signal Satellite finder function with static NIT evaluation
• LNB input via F-connector with short circuit protection
• Real-Time Spectrum Analyzer (with selectable Span: 100, 300, 600 and 1200 MHz)
• Constellation - Measurement / Constalltion - diagram
• X-pol. Measurement (Vertical and horizontal level at a time)
• Multilevel measurement (Optimum alignment 2 satellite with an antenna)
• PACKAGE metering: Meters max. 5 transponders simultaneously
• DiSEqC Scan: Analyzes all input signals of a DiSEqC switch / multi-switch and assigns each connection to the correct satellite
• Mux-scan measurement (multi-switch tester)
• Quick test for LNB power measures the actual power consumption of the connected LNB Audible and visual signal quality and signal strength indicator Unicable-Measurement (SCR freq. 1284, 1400, 1516, 1632, 1748, 1864, 1980 + 2096 MHz)
• KU, C, L / R band
• KA band
• DISEQC 1.0 1.1 and 1.2, motor control & USALS Control
• Custom adjustable transponder (16 Transponder/32 satellites)
• Long life lithium batteries (2200mAH 7.4V Li-On) with IC control
• Battery capacity for more than three hours of continuous operation sufficient
• Easy adjustment and modification of the satellite parameters by software update
• USB interface for Software update with USB Stick
• Securing one's own satellite list
• Transferring new satellite lists
• Dimensions (W x H x D): 100x 40x 18mm
• Weight: about 0.8 Kg, incl batteries

11 Menu Languages:

German, English, Turkish, Spanish, Russian, French, Portuguese, Arabic, Kurdish, Italian and Greek.

PC Software / SAT - EDIT - TOOL

• With the PC software, you can edit the transponder / satellite list
• Edit Satellite, add & remove
• Edit Transponder, add & remove

Scope Of Delivery:

• Satfinder 5 HD Slim
• Nylon carrying case with shoulder strap
• HF cable 1,0m with F-Quick Plug
• Charging adapter 100-240V AC / 12V DC
• 12V cigarette lighter charger